Official Logo Leon Bianchi Elevators
(315) 557-4547

Cab Options

Cabs are available in 6′ 8″, 7′ 0″ and 8′ 0″ heights.
(Note: High cabs require additional overhead clearance)
Standard home elevator cab with melamine finish available in white, beige, black, or light oak

Standard

Melamine in choice of: white, beige, black or light oak.

Raised panel home elevator cab with elegant hardwood molding and classic interior design

Raised Panel

Elegant cab with choice of base wood species and raised hardwood molding.

Shaker-style home elevator cab with white finish and raised paneling on the lower half

Shaker

White cab with raised paneling on lower half of cab.

Available Upgrades:
Unfinished birch, oak, mahogany or cherry, or birch w/ clear coat.

Available Upgrades:

White, Unfinished: Birch, Oak or Mahogany

Gate Options

White panel accordion gates come standard with all elevators. Custom gates are also available to compliment different architectural styles and tastes.
White panel accordion gate installed inside a residential home elevator

White Panels

Standard

Clear panel accordion gate upgrade for residential elevators with modern appearance

Clear Panels

Available Upgrade

Cab Sizes

Optional Sizes

36″ W x 60° D
42″ W x 54″ D
Custom Sizes Available

Standard

36″ W x 36″ D
36″ W x 48″ D
48″ W x 36″ D

Lighting Options

Ceiling designs and lighting options may be mixed and matched

Two recessed LED

Two recessed LED

Melamine in choice of: white, beige, black or light oak.

Home elevator ceiling with four recessed LED lights providing enhanced interior illumination

Four recessed LED

Melamine in choice of: white, beige, black or light oak.

LED lights, 3″ diameter, stainless steel trim ring.

Fixture Options

Stainless steel elevator control fixture with modern finish for residential elevators

Stainless Steel

Standard

Muntz bronze elevator control fixture available as an upgraded finish for home elevators

Muntz Bronze

Available Upgrade

Handrail Options

Flat bar polished aluminum handrail installed inside a residential elevator cab

Flat Bar

Standard

Round bar polished aluminum handrail available as an upgrade for home elevator interiors

Round Bar

Available Upgrade

Polished aluminum handrails.

Technical Specifications

MODEL : STANDARD Upgrade

CAPACITY : 950 lbs.

TYPE — Machine-Room-Less

Cab Sizes
Standard Sizes : 36" W x 36" D / 36" W x 48" D / 48" W x 36" D
Optional Sizes : 36" W x 60" D / 42" W x 54" D
Custom Sizes Available : Approximate 10.0 (standard)
Cab Heights
Standard : 6'8" (80")
Optional : 7'0" (84") / 8'0" (96")
Performance
Nominal Speed : 40 fpm
Max Travel : 50'
Max Landings : 7
Overhead / Clearance / Required
Overhead : 6'8" cab requires 102"
Clearance : 7'0" cab requires 108"
Required : 8'0" cab requires 117"
Measured from top landing floor level to lowest point in elevator shaft
Power & Drive
Power Requirement : 230V with 30amp circuit / 110V with 15amp circuit
Drive System : VVVF motor controls and geared winding drum machine
Construction
Pit Depth : 8" minimum, 12" recommended
Car Door : Electromechanical door interlocks
Controls & Switches : Automatic operation, optical leveling, industrial PLC controls, ETL listed controller, floor buttons, alarm button in cab, hall station floor buttons, emergency stop switch
Safety & Others
Finished Flooring : By others. 1/4" tolerance, we supply subfloor only
Emergency : Emergency phone, emergency stop switch
Safety : Slack cable switch and wedge safeties, final limit switch, inte-grated interlocks, emergency stop switch. All safety features required by ASME A17.1, section 5 (Nation al Elevator Code
Work by Others : Plumb & square shaft, pit construction, access hatch, electrical and phone
  • Electromechanical door interlocks
  • Broken cable type “A” instant safeties
  • Optical landing system
  • “Sleep mode” to conserve energy and component life when elevator is not in use.
  • Aluminum platform and rail brackets
  • Recessed lighting, automatic
  • Stainless steel fixtures
  • Concealed telephone for emergency communications
  • Controller supports 4 landings standard, 7 landings optional
  • Automatic 2nd level homing (after 20 minutes, elevator will automatically move from the 1st level to the second level.)
  • All safety features required by ASME A17.1, section 5 (National Elevator Code
  • ETL listed controller

Safety

  • Door interlocks mounted on all swing doors to prevent the doors from being opened when the elevator is not present.
  • Broken cable safeties lock the elevator cab to the guide rails in the unlikely event one of the hoist cables break.
  • Cab mounted solid gate to contain hands, feet, and cargo inside the elevator. Elevator will not operate unless the gate is closed.
  • Emergency phone
  • Optional emergency battery lowering
  • Optional door baffles to ensure compliance with the 3″ x 5″ swing door rule.
Call Now Button